JuNeng NigLtd’s recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes.

These oxidizers include heat recovery modules to preheat combustion air and incoming waste process stream to minimize fuel consumption for economical operation.

Primary advantage of the unit is low emissions and efficient combustion efficiency with low fuel consumption. Destruction efficiencies up to 99.9% can be achieved.

JuNeng NigLtd’s regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. JuNeng NigLtd’s RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust flow rates. 

Standard systems are fully integrated and pre-packaged with:  Programmable logic control system for efficient operation and integrated burner management, NFPA 86 compliant gas train systems, High cycle dampers, Modular bed design, and Two canister or three canister designs.

JuNeng NigLtd’s Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazardous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F – 800° F) than a direct thermal oxidizer (1400° F – 1800° F).

Destruction efficiencies up to 99.9% can be achieved. Primary advantage of JuNeng NigLtd’s catalytic oxidizer is lower fuel requirements thus reducing the overall emission footprint. 

Our systems are designed to provide maximum destruction efficiency and are tailored to meet the process conditions.  Our systems are designed to include any heat recuperation as necessary and heat recuperation is basically a recuperative or regenerative type depending upon the process requirements. 

Standard systems are fully integrated and pre-packaged with:  Industrial grade catalyst, Low NOx burner, Programmable logic control system and burner management systems, and NFPA 86 compliant gas train systems.

JuNeng NigLtd’s also provides specialty/custom incineration systems that are engineered and tailored to suit the end user process and waste requirements. Below are some of our specialty incineration systems: 

• Liquid thermal incineration systems – thermal oxidation systems for liquid wastes and fuels,
• Solid waste incineration systems – thermal oxidation systems to handle solid medical & municipal wastes,
• Liquid & solid waste hybrid incinerator systems – which is specifically designed in order to operate on the controlled air pyrolytic principle of the combustion of solid and liquid waste.
• Flue gas ash handling systems – for handling ash or inert solids in gaseous or solid waste incinerators.
• Waste-to-energy – All our waste incinerators have a wide range of options such as electricity using our Waste to Energy Systems, hot water and hot air from our Heat Exchangers. Commercial and Industrial waste streams can be incinerated and the waste air used to run these various processes.

Whatever your waste problem (Liquid Waste, Solid Waste, Pharmaceutical Waste, Bio-Medical Waste, Industrial Waste), JuNeng NigLtd will surely have you covered.

In a world with an increasing population and consumption there is a pressing need to use our resources in the best possible way. This involves reducing the generation of waste, high-quality recycling and use of the residual waste for efficient and clean energy generation.

Being an innovative turnkey-solution provider of environmental protection technologies and backed by our international Joint Venture (JV) partners from Europe and Asia, JuNeng NigLtd offers a rich assortment of waste-to-energy solutions, technologies and consultancy.

JuNeng NigLtd provides technologies for the treatment of municipal solid waste and sludge. Its waste-to-energy (WTE) plants use advanced technology solutions to generate green energy from waste and help in landfill diversion by as much as 90% through reduction in the volume of waste disposed, thereby maximising the value of waste streams and minimising the environmental impact.

All our waste incinerators have a wide range of options such as electricity using our Waste to Energy Systems, hot water and hot air from our Heat Exchangers. Commercial and Industrial waste streams can be incinerated and the waste air used to run these various processes.